today we’re having a look at a motorized sit-stand desk…Amazon Prime Flexispot… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. Examine out the video listed below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and fast, however it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also handy if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are even more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (because this suggested it was going to be strong) and likewise a little reluctant (because all of us know just how much of an obstacle assembling furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I like the streamlined look of this desk. I’m positive any of the many varied finishes that it can be found in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as often times as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I might on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you ought to understand by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had purchased this I ‘d have been on the phone with customer care instantly they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually definitely where any kind of cable television management products whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but less expensive does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged also my plan for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at finest seems like a less expensive replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to have a look at their site also which likewise feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering different choices and accessories I might however I believe I’m better that they only sent out a fundamental desk because as a standard desk I’m not a fan of the quality control at this price point and I do not think slapping on a lot of additionals is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is 5 years and uplift desk is seven years if you are Amazon Prime Flexispot
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and efficiency however I would invest the extra money it’s gon na take to get into a higher end manufacturer like uplift desk or really desk and I haven’t personally used really desk items so I can’t speak on it but their track record is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a client perspective you ‘d most likely be really excited to get this in