today we’re having a look at a motorized sit-stand desk…Autofocus Area Flexi Flexispot… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you don’t believe me, have a look at the video below of it running while there’s a person resting on it.
The electrical raise/lower function is not only easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are far more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t always a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how durable the Flexispot is.
The practical cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this indicated it was going to be tough) and also a little reluctant (due to the fact that all of us know how much of a challenge putting together furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as put together, I like the streamlined appearance of this desk. I’m positive any of the many varied surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near to that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you need to understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough man if I had actually acquired this I ‘d have been on the phone with customer care immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function unusually absolutely where any type of cable television management materials whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control panel that enables up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% more affordable even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but cheaper does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged also my plan for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a cheaper replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their website as well which likewise feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering various alternatives and accessories I might but I believe I’m better that they just sent out a standard desk because as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a lot of bonus is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Autofocus Area Flexi Flexispot
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the extra money it’s gon na require to get into a higher end maker like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters showed up damaged however from a customer viewpoint you ‘d probably be actually delighted to get this in