today we’re taking a look at a motorized sit-stand desk…Ec1B Flexispot… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and quick, however it’s also remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much thought.
On top of being practical, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are much more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t necessarily a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how tough the Flexispot is.
The practical cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (considering that this suggested it was going to be tough) and likewise a little hesitant (due to the fact that all of us know how much of an obstacle assembling furniture can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as lot of times as you desire throughout the day.
Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I could on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you need to know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable grommets for go through the outdoors carton
for the desktop was not harmed in any way which is utterly strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough male if I had actually purchased this I ‘d have been on the phone with customer service immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely definitely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual phase dual motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed too my prepare for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best seems like a more affordable replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their website too which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering numerous alternatives and devices I might however I believe I’m happier that they only sent out a fundamental desk because as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of additionals is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is seven years if you are Ec1B Flexispot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and performance but I would invest the additional money it’s gon na require to get into a greater end producer like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it but their track record is great huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a consumer perspective you ‘d most likely be actually thrilled to get this in