today we’re taking a look at a motorized sit-stand desk…F3 Compact Sit Stand Flexispot… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to put together, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s super durable and can hold a lot of weight. Inspect out the video below of it running while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and quickly, but it’s likewise remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (given that this indicated it was going to be tough) and also a little reluctant (since all of us know how much of an obstacle assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
Once assembled, I like the streamlined look of this desk. I’m confident any of the many diverse surfaces that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as often times as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I might on uplifts site with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you need to understand by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for go through the outdoors container
for the desktop was not harmed in any way which is absolutely unusual since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had acquired this I ‘d have been on the phone with client service immediately they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the double phase double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come basic with the control panel that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% cheaper even if you update this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed as well my prepare for this desk at this point is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it just doesn’t feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to check out their website also which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering various options and accessories I could but I think I’m better that they only sent out a standard desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of additionals is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is seven years if you are F3 Compact Sit Stand Flexispot
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and performance but I would spend the money it’s gon na take to get into a greater end maker like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it but their credibility is very good big thanks to flexi area for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters got here damaged but from a customer perspective you ‘d most likely be actually delighted to get this in