today we’re taking a look at a motorized sit-stand desk…Flexispot ‰∏≠ÂõΩ… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. If you don’t think me, take a look at the video listed below of it running while there’s an individual resting on it.
The electrical raise/lower feature is not only easy to use and quick, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also handy if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this implied it was going to be tough) and likewise a little reluctant (due to the fact that we all understand how much of a challenge putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When put together, I love the streamlined look of this desk. I’m confident any of the many varied surfaces that it is available in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as lot of times as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or want to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near that as I could on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you need to know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had actually bought this I ‘d have been on the phone with client service right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly absolutely where any type of cable management products whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the dual stage dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come basic with the control board that allows for up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however cheaper does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged also my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at finest feels like a more affordable replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their site as well which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering various alternatives and devices I could however I think I’m happier that they just sent a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a bunch of extras is the move when the core product isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot ‰∏≠ÂõΩ
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity but I would invest the money it’s gon na take to get into a greater end maker like uplift desk or very desk and I have not personally used very desk products so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters got here damaged but from a client perspective you ‘d most likely be truly excited to get this in