today we’re taking a look at a motorized sit-stand desk…Flexispot スタンディングデスクレビュー… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you do not believe me, take a look at the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower function is not just easy to use and fast, however it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being practical, it also looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also useful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more budget friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how strong the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (because this meant it was going to be sturdy) and likewise a little reluctant (due to the fact that we all know just how much of a challenge putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the smooth look of this desk. I’m positive any of the many varied finishes that it comes in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite fundamental I tried to get as near that as I might on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review but as you must understand by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had actually bought this I ‘d have been on the phone with customer care immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come basic with the control panel that enables up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my prepare for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a less expensive replica of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their website too which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering different alternatives and devices I could but I believe I’m better that they only sent out a basic desk because as a fundamental desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a bunch of additionals is the move when the core product isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot スタンディングデスクレビュー
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and performance however I would spend the extra money it’s gon na take to enter into a greater end producer like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it but their reputation is excellent huge thanks to flexi area for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed but from a consumer standpoint you ‘d most likely be truly thrilled to get this in