today we’re having a look at a motorized sit-stand desk…Flexispot 10 Off… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and fast, but it’s also surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are far more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how tough the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (because this meant it was going to be durable) and also a little hesitant (because all of us understand how much of a difficulty putting together furniture can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I like the sleek look of this desk. I’m confident any of the many varied surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as sometimes as you want throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite standard I attempted to get as near to that as I could on uplifts website with similar setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you should understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for go through the outdoors container
for the desktop was not damaged in any way which is utterly unusual because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had purchased this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double phase double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this model does come basic with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed too my plan for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their website too which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering various options and accessories I might but I think I’m better that they only sent a standard desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a lot of extras is the move when the core item isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot 10 Off
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency however I would spend the additional money it’s gon na take to enter into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally utilized extremely desk products so I can’t speak on it however their credibility is great big thanks to flexi area for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed however from a customer standpoint you ‘d probably be really delighted to get this in