today we’re having a look at a motorized sit-stand desk…Flexispot 160X80… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s really simple to put together, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. If you do not believe me, check out the video listed below of it running while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and quick, but it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much idea.
On top of being practical, it likewise looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise practical if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (because this meant it was going to be strong) and also a little reluctant (due to the fact that all of us know just how much of a challenge assembling furniture can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When put together, I enjoy the streamlined look of this desk. I’m positive any of the many diverse surfaces that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near to that as I might on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you should know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get doing not have even any cable grommets for go through the outdoors carton
for the desktop was not damaged in any way which is entirely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had bought this I ‘d have been on the phone with customer service immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come standard with the control panel that permits up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however less expensive does not indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed also my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at best seems like a more affordable imitation of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to have a look at their site too which also feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering various alternatives and accessories I might but I think I’m better that they only sent out a standard desk since as a standard desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a lot of bonus is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot 160X80
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and performance however I would spend the additional money it’s gon na take to enter into a greater end producer like uplift desk or really desk and I haven’t personally utilized very desk items so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters showed up damaged but from a consumer perspective you ‘d probably be actually delighted to get this in