today we’re taking a look at a motorized sit-stand desk…Flexispot 35″ Wide Platform Height Adjustable Standing Desk Riser,… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video listed below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and fast, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much thought.
On top of being practical, it likewise looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (since this implied it was going to be durable) and also a little hesitant (since all of us know how much of a difficulty putting together furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I enjoy the sleek look of this desk. I’m positive any of the many diverse finishes that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as often times as you want throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I might on uplifts website with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must know by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable television grommets for go through the outside carton
for the desktop was not harmed in any way which is entirely strange since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with customer support immediately they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely definitely where any type of cable management products whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated as well to both the double stage double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would offer this unit over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed also my prepare for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a less expensive imitation of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to check out their website too which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our valuable time covering different alternatives and accessories I could but I think I’m better that they just sent a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a lot of additionals is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot 35″ Wide Platform Height Adjustable Standing Desk Riser,
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the extra money it’s gon na require to enter a higher end maker like uplift desk or really desk and I haven’t personally utilized very desk items so I can’t speak on it but their track record is excellent huge thanks to flexi area for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters got here harmed however from a customer perspective you ‘d most likely be really delighted to get this in