today we’re having a look at a motorized sit-stand desk…Flexispot 5″ 5Adjustable Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. If you do not think me, check out the video below of it running while there’s a person resting on it.
The electrical raise/lower function is not only easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being functional, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise valuable if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more cost effective than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (because this implied it was going to be tough) and likewise a little reluctant (because all of us understand just how much of a challenge assembling furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
Once assembled, I like the smooth appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as close to that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable grommets for travel through the outdoors container
for the desktop was not damaged in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough male if I had acquired this I ‘d have been on the phone with client service immediately they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but cheaper doesn’t suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed too my prepare for this desk at this moment is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a less expensive imitation of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their site as well which likewise feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our valuable time covering different choices and devices I could however I believe I’m better that they just sent out a standard desk because as a standard desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a lot of additionals is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot 5″ 5Adjustable Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and performance but I would spend the money it’s gon na require to enter into a higher end maker like uplift desk or very desk and I haven’t personally utilized really desk products so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged however from a consumer viewpoint you ‘d probably be truly delighted to get this in