today we’re having a look at a motorized sit-stand desk…Flexispot 55 X 28… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s very durable and can hold a lot of weight. If you do not think me, check out the video listed below of it running while there’s a person resting on it.
The electrical raise/lower function is not only easy to use and quick, but it’s likewise remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also useful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how tough the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (considering that this implied it was going to be tough) and also a little hesitant (since all of us know just how much of a challenge assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the sleek appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or wish to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as near to that as I might on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to know by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get doing not have even any cable grommets for pass through the outside container
for the desktop was not harmed in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had actually acquired this I ‘d have been on the phone with customer care right away they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually absolutely where any type of cable management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated too to both the double stage double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a rate would be the one benefit I would give this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed too my plan for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at best feels like a cheaper replica of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to take a look at their site too which also feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering different choices and accessories I might however I think I’m happier that they only sent out a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of extras is the relocation when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot 55 X 28
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity but I would invest the additional money it’s gon na require to enter a greater end manufacturer like uplift desk or very desk and I haven’t personally utilized really desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here harmed but from a customer viewpoint you ‘d most likely be actually thrilled to get this in