today we’re having a look at a motorized sit-stand desk…Flexispot Address… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. Examine out the video listed below of it running while there’s an individual lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more cost effective than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how strong the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (because this implied it was going to be sturdy) and likewise a little reluctant (due to the fact that all of us understand how much of a challenge assembling furniture can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I love the smooth look of this desk. I’m confident any of the many varied finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as many times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or want to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near to that as I might on uplifts website with similar setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you must know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is entirely strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had bought this I ‘d have been on the phone with client service immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but less expensive does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged also my plan for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at finest seems like a cheaper replica of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to take a look at their website also which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering various alternatives and devices I might but I think I’m happier that they just sent a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a bunch of bonus is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Address
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity but I would invest the money it’s gon na take to enter a higher end maker like uplift desk or very desk and I have not personally used really desk items so I can’t speak on it but their track record is excellent huge thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed but from a consumer perspective you ‘d probably be really delighted to get this in