today we’re taking a look at a motorized sit-stand desk…Flexispot Adjustable Desk Reviews… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very strong and can hold a lot of weight. Check out the video listed below of it running while there’s a person lying down on it if you do not think me.
The electrical raise/lower feature is not just easy to use and quick, however it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise practical if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (because this meant it was going to be sturdy) and likewise a little reluctant (because we all know just how much of a challenge putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the sleek appearance of this desk. I’m confident any of the many varied finishes that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as sometimes as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to take a nap on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is quite basic I attempted to get as near to that as I could on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you should understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had actually purchased this I ‘d have been on the phone with customer service right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come standard with the control panel that enables up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but less expensive does not mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged also my prepare for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at best feels like a cheaper replica of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to take a look at their site too which also feels eerily similar to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering numerous options and accessories I could but I think I’m better that they just sent out a standard desk since as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of extras is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Adjustable Desk Reviews
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance but I would invest the money it’s gon na take to enter a higher end manufacturer like uplift desk or extremely desk and I have not personally utilized really desk products so I can’t speak on it however their credibility is excellent huge thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters got here harmed but from a customer viewpoint you ‘d probably be truly thrilled to get this in