today we’re taking a look at a motorized sit-stand desk…Flexispot Adjustable Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s very durable and can hold a great deal of weight. If you do not think me, have a look at the video below of it running while there’s an individual resting on it.
The electric raise/lower feature is not just easy to use and quickly, however it’s likewise surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being functional, it also looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are much more inexpensive than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (considering that this suggested it was going to be sturdy) and also a little reluctant (because all of us know just how much of a challenge putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the streamlined look of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I might on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you need to know by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get lacking even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had bought this I ‘d have been on the phone with customer service right away they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly definitely where any kind of cable television management materials whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come basic with the control board that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% less expensive even if you update this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive doesn’t imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furnishings that will last you this at finest feels like a less expensive replica of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their site too which likewise feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering different choices and accessories I could but I think I’m better that they just sent a basic desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a lot of bonus is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Adjustable Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the extra money it’s gon na take to enter a greater end manufacturer like uplift desk or very desk and I have not personally utilized extremely desk items so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged but from a consumer viewpoint you ‘d probably be truly excited to get this in