Find Flexispot Adjustable Standing Desk Pro Series 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Adjustable Standing Desk Pro Series… you might have seen my evaluation on the uplift desk, if not …

In general, I need to say I like the Flexispot E7.

here are a lot of things to like about the Flexispot E7. In general, my experience was really favorable.

It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s very tough and can hold a lot of weight. Examine out the video listed below of it running while there’s a person lying down on it if you do not believe me.

The electrical raise/lower function is not just easy to use and fast, however it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much thought.
On top of being practical, it also looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise handy if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a substantial fan of:

The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it arrived and I saw how heavy it was, I was both excited (considering that this implied it was going to be durable) and also a little hesitant (due to the fact that all of us know just how much of an obstacle putting together furniture can be).

Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.

As soon as assembled, I like the smooth appearance of this desk. I’m confident any of the many varied finishes that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.

The quiet operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as lot of times as you want throughout the day.

Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or wish to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.

 

in that video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near that as I could on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to understand by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable television grommets for pass through the outdoors container

for the desktop was not damaged in any way which is absolutely strange since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough guy if I had acquired this I ‘d have been on the phone with customer service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any type of cable management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up

an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one benefit I would give this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when

this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed as well my plan for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest feels like a less expensive imitation of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their site as well which also feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering various alternatives and accessories I might however I think I’m better that they only sent a standard desk because as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of bonus is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Adjustable Standing Desk Pro Series

in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and productivity but I would invest the additional money it’s gon na take to enter a higher end manufacturer like uplift desk or very desk and I have not personally used really desk items so I can’t speak on it but their credibility is excellent huge thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a consumer perspective you ‘d most likely be really excited to get this in

Published