today we’re having a look at a motorized sit-stand desk…Flexispot Alcoveriser… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very easy to assemble, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you do not think me, check out the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower feature is not just easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being functional, it likewise looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (because this suggested it was going to be durable) and likewise a little reluctant (due to the fact that we all know how much of a difficulty putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the streamlined appearance of this desk. I’m confident any of the many varied finishes that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I tried to get as near that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable television grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough man if I had purchased this I ‘d have been on the phone with customer care right away they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual phase dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% more affordable even if you update this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but less expensive does not imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged also my plan for this desk at this moment is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to check out their website also which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering various options and devices I might however I believe I’m happier that they only sent a standard desk because as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of additionals is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Alcoveriser
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and performance however I would invest the money it’s gon na take to get into a higher end producer like uplift desk or extremely desk and I have not personally utilized really desk products so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for evaluation sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a customer standpoint you ‘d most likely be really delighted to get this in