today we’re having a look at a motorized sit-stand desk…Flexispot All In One… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s very easy to put together, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Examine out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and quick, but it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being functional, it also looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how durable the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (considering that this indicated it was going to be tough) and likewise a little reluctant (since we all know just how much of a challenge putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
When put together, I love the streamlined appearance of this desk. I’m positive any of the many diverse finishes that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as often times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or wish to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I might on uplifts website with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you need to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get lacking even any cable television grommets for go through the outside container
for the desktop was not damaged in any way which is absolutely bizarre because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough guy if I had acquired this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift but cheaper does not suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my prepare for this desk at this point is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best feels like a more affordable imitation of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their site too which likewise feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering various options and devices I could but I believe I’m better that they just sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of extras is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot All In One
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the extra money it’s gon na take to enter into a greater end maker like uplift desk or extremely desk and I have not personally utilized really desk products so I can’t speak on it however their reputation is very good huge thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters got here damaged however from a customer perspective you ‘d probably be really delighted to get this in