today we’re taking a look at a motorized sit-stand desk…Flexispot Back Support Office Chair… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you don’t believe me, take a look at the video below of it running while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and fast, but it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being functional, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how durable the Flexispot is.
The hassle-free cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this meant it was going to be sturdy) and also a little reluctant (because all of us understand just how much of an obstacle assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I love the smooth appearance of this desk. I’m positive any of the many diverse surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as often times as you want throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I could on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you should understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get lacking even any cable television grommets for travel through the outside container
for the desktop was not damaged in any way which is utterly unusual since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with customer service immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but less expensive does not mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed too my prepare for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at finest feels like a cheaper replica of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to have a look at their website too which also feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering numerous choices and devices I could however I believe I’m happier that they only sent a standard desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of extras is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Back Support Office Chair
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the extra money it’s gon na take to get into a greater end manufacturer like uplift desk or very desk and I haven’t personally utilized really desk items so I can’t speak on it however their reputation is excellent huge thanks to flexi area for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed however from a consumer perspective you ‘d probably be really delighted to get this in