today we’re having a look at a motorized sit-stand desk…Flexispot Bambus… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s very durable and can hold a lot of weight. If you don’t believe me, have a look at the video listed below of it operating while there’s an individual lying down on it.
The electric raise/lower function is not just easy to use and fast, but it’s also remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much idea.
On top of being functional, it also looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also practical if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how durable the Flexispot is.
The practical cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (considering that this suggested it was going to be tough) and also a little reluctant (since we all know how much of a difficulty putting together furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
When put together, I like the smooth appearance of this desk. I’m confident any of the many diverse finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near that as I could on uplifts site with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable grommets for pass through the outside container
for the desktop was not harmed in any way which is utterly strange since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough man if I had actually acquired this I ‘d have been on the phone with customer service right away they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually definitely where any kind of cable television management materials whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come standard with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive does not suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed too my prepare for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at best seems like a cheaper imitation of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their website also which likewise feels eerily comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering different options and devices I could however I believe I’m happier that they just sent a basic desk due to the fact that as a basic desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a bunch of additionals is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot Bambus
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and efficiency but I would spend the additional money it’s gon na take to get into a higher end manufacturer like uplift desk or very desk and I haven’t personally utilized very desk items so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters got here harmed however from a customer perspective you ‘d probably be really delighted to get this in