today we’re taking a look at a motorized sit-stand desk…Flexispot Bewegung B√ºRo… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. If you do not believe me, take a look at the video below of it operating while there’s an individual resting on it.
The electrical raise/lower feature is not just easy to use and fast, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are much more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (because this indicated it was going to be sturdy) and likewise a little hesitant (since all of us understand how much of a difficulty assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the streamlined look of this desk. I’m confident any of the many diverse surfaces that it is available in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as often times as you want throughout the day.
Lastly, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or wish to take a nap on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite standard I attempted to get as near to that as I might on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you must know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply extremely rough male if I had actually purchased this I ‘d have been on the phone with customer care immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable doesn’t indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my plan for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at best seems like a less expensive imitation of that it just does not feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their website as well which also feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering various options and devices I might but I think I’m better that they just sent out a standard desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a bunch of additionals is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Bewegung B√ºRo
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and efficiency but I would invest the extra money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I have not personally utilized extremely desk products so I can’t speak on it but their track record is excellent huge thanks to flexi spot for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters got here harmed however from a client perspective you ‘d most likely be truly excited to get this in