today we’re having a look at a motorized sit-stand desk…Flexispot Bike Desk Canada… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you do not believe me, check out the video below of it running while there’s an individual resting on it.
The electric raise/lower function is not just easy to use and quick, but it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much idea.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise handy if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this suggested it was going to be sturdy) and likewise a little hesitant (because all of us know how much of a difficulty assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
Once put together, I like the smooth look of this desk. I’m confident any of the many varied surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or wish to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I might on uplifts site with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you must know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get lacking even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is entirely unusual because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had bought this I ‘d have been on the phone with client service instantly they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely definitely where any type of cable management materials whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated too to both the double phase dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however more affordable does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed as well my plan for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at best feels like a more affordable imitation of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their website also which also feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering different choices and devices I might but I believe I’m happier that they just sent a standard desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a bunch of bonus is the move when the core product isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Bike Desk Canada
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity however I would spend the money it’s gon na take to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally utilized really desk items so I can’t speak on it however their track record is great big thanks to flexi area for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged but from a customer standpoint you ‘d probably be truly delighted to get this in