today we’re taking a look at a motorized sit-stand desk…Flexispot Bike… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you do not think me, have a look at the video listed below of it operating while there’s an individual resting on it.
The electrical raise/lower feature is not only easy to use and fast, however it’s likewise remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much idea.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also practical if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are even more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The practical cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (given that this suggested it was going to be sturdy) and likewise a little reluctant (since we all understand how much of an obstacle putting together furniture can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the smooth look of this desk. I’m confident any of the many varied finishes that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as close to that as I could on uplifts website with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you need to understand by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is entirely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough guy if I had actually bought this I ‘d have been on the phone with customer support instantly they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely definitely where any kind of cable management materials whatsoever the frame on this unit is a single motor dual phase design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% less expensive even if you update this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed as well my plan for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at best feels like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to have a look at their website as well which likewise feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering numerous alternatives and accessories I might however I think I’m happier that they only sent out a standard desk because as a standard desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a bunch of bonus is the relocation when the core item isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Bike
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance however I would spend the extra money it’s gon na take to enter a greater end manufacturer like uplift desk or very desk and I have not personally used very desk products so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with seeing as how both the desktop and the casters got here harmed however from a consumer standpoint you ‘d probably be truly delighted to get this in