today we’re having a look at a motorized sit-stand desk…Flexispot Chipboard… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Inspect out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much thought.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how sturdy the Flexispot is.
The hassle-free cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (because this suggested it was going to be tough) and likewise a little hesitant (due to the fact that we all understand just how much of an obstacle assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the sleek look of this desk. I’m confident any of the many diverse surfaces that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite fundamental I tried to get as near to that as I could on uplifts website with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you need to understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable grommets for go through the outdoors carton
for the desktop was not harmed in any way which is absolutely strange because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just incredibly rough male if I had acquired this I ‘d have been on the phone with customer support immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly absolutely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual stage dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged also my prepare for this desk at this point is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at best feels like a cheaper imitation of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to check out their website as well which also feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering different options and devices I could but I believe I’m better that they only sent a fundamental desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a bunch of additionals is the relocation when the core item isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Chipboard
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the extra money it’s gon na require to enter a higher end maker like uplift desk or extremely desk and I have not personally utilized really desk items so I can’t speak on it however their track record is great big thanks to flexi spot for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here harmed however from a customer perspective you ‘d most likely be really thrilled to get this in