today we’re taking a look at a motorized sit-stand desk…Flexispot Classic Riser… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s very simple to put together, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Examine out the video below of it operating while there’s an individual lying down on it if you don’t think me.
The electric raise/lower feature is not just easy to use and quick, but it’s likewise remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also valuable if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are even more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (because this suggested it was going to be tough) and likewise a little reluctant (because we all understand how much of a challenge putting together furniture can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the sleek look of this desk. I’m confident any of the many varied finishes that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as many times as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or want to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near that as I could on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you need to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get doing not have even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had actually bought this I ‘d have been on the phone with customer service immediately they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% more affordable even if you update this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however less expensive does not indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged also my prepare for this desk at this moment is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at finest seems like a cheaper replica of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their website too which likewise feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering various choices and devices I could but I believe I’m better that they only sent out a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a bunch of extras is the relocation when the core product isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Classic Riser
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the additional money it’s gon na take to enter a greater end producer like uplift desk or extremely desk and I haven’t personally utilized very desk items so I can’t speak on it but their track record is very good big thanks to flexi area for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed however from a consumer standpoint you ‘d most likely be actually excited to get this in