today we’re having a look at a motorized sit-stand desk…Flexispot Cmp502… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very positive.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you don’t think me.
The electric raise/lower feature is not only easy to use and quick, but it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much idea.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are much more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how sturdy the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (considering that this indicated it was going to be strong) and likewise a little reluctant (due to the fact that we all understand just how much of a challenge assembling furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to switch between sitting and standing as sometimes as you desire throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as close to that as I might on uplifts website with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you must understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable television grommets for go through the outdoors container
for the desktop was not damaged in any way which is absolutely bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough guy if I had bought this I ‘d have been on the phone with customer service right away they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the dual phase dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but cheaper does not imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed as well my plan for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest seems like a less expensive replica of that it simply does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to take a look at their site as well which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering different alternatives and devices I might however I think I’m happier that they only sent out a basic desk because as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of additionals is the move when the core product isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Cmp502
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the additional money it’s gon na take to enter a higher end maker like uplift desk or really desk and I haven’t personally used extremely desk items so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters got here damaged however from a consumer viewpoint you ‘d most likely be truly delighted to get this in