today we’re having a look at a motorized sit-stand desk…Flexispot Code Asr… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s very durable and can hold a lot of weight. If you don’t think me, check out the video below of it running while there’s a person lying down on it.
The electric raise/lower feature is not just easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being functional, it also looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more economical than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The practical cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this suggested it was going to be tough) and also a little hesitant (because we all know just how much of a challenge putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined look of this desk. I’m confident any of the many diverse finishes that it is available in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as sometimes as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I tried to get as close to that as I might on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you ought to know by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough male if I had actually purchased this I ‘d have been on the phone with client service right away they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely definitely where any sort of cable television management materials whatsoever the frame on this unit is a single motor dual phase design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the double stage double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one benefit I would provide this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged too my prepare for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best feels like a less expensive replica of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to check out their website too which likewise feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering various options and devices I could however I believe I’m better that they only sent out a standard desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of additionals is the move when the core item isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Code Asr
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and productivity but I would spend the additional money it’s gon na require to enter a greater end maker like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it however their reputation is very good huge thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters got here damaged however from a customer viewpoint you ‘d probably be actually excited to get this in