today we’re having a look at a motorized sit-stand desk…Flexispot Comhar Standing Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you do not believe me, have a look at the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower function is not just easy to use and quickly, but it’s also remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much idea.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise useful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are even more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how durable the Flexispot is.
The hassle-free cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (because this implied it was going to be tough) and also a little hesitant (since we all know just how much of a difficulty putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I like the sleek appearance of this desk. I’m confident any of the many varied finishes that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as lot of times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as close to that as I could on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to know by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with customer care right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly definitely where any sort of cable management materials whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% cheaper even if you update this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged as well my prepare for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a less expensive replica of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their site also which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering various alternatives and accessories I could but I believe I’m better that they just sent out a fundamental desk since as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a bunch of bonus is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Comhar Standing Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the money it’s gon na require to enter a greater end maker like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it however their credibility is very good huge thanks to flexi area for sending this out for review unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged but from a customer perspective you ‘d probably be really delighted to get this in