today we’re taking a look at a motorized sit-stand desk…Flexispot Compact Series 32… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. If you do not think me, check out the video below of it operating while there’s a person lying down on it.
The electrical raise/lower function is not just easy to use and fast, however it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how durable the Flexispot is.
The hassle-free cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (since this indicated it was going to be sturdy) and likewise a little hesitant (because we all know just how much of a difficulty assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I love the smooth look of this desk. I’m confident any of the many varied finishes that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as lot of times as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or want to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near to that as I might on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you ought to know by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is entirely strange because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had actually purchased this I ‘d have been on the phone with customer service immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually definitely where any type of cable management materials whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but cheaper does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed as well my plan for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest seems like a less expensive imitation of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their website too which likewise feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering different alternatives and accessories I might but I think I’m better that they just sent a standard desk since as a standard desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of extras is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Compact Series 32
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance however I would spend the money it’s gon na require to get into a greater end maker like uplift desk or really desk and I have not personally used extremely desk items so I can’t speak on it however their track record is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged however from a customer perspective you ‘d probably be really thrilled to get this in