today we’re taking a look at a motorized sit-stand desk…Flexispot Corner Desk… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s very simple to assemble, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly durable and can hold a great deal of weight. Check out the video below of it operating while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower feature is not only easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are much more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a consequence of how strong the Flexispot is.
The practical cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (given that this indicated it was going to be durable) and also a little hesitant (because we all know how much of an obstacle assembling furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I like the smooth appearance of this desk. I’m confident any of the many varied surfaces that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite fundamental I attempted to get as near to that as I could on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you need to know by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is entirely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough guy if I had acquired this I ‘d have been on the phone with customer care right away they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any kind of cable management products whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual stage double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but less expensive doesn’t mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed too my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a cheaper imitation of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to have a look at their website as well which likewise feels eerily comparable to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering numerous alternatives and accessories I could but I believe I’m better that they just sent out a fundamental desk because as a standard desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of extras is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Corner Desk
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the money it’s gon na take to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally utilized extremely desk products so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed but from a consumer viewpoint you ‘d probably be really delighted to get this in