today we’re having a look at a motorized sit-stand desk…Flexispot Crank Adjustable Standing Desk H1… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really simple to put together, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Check out the video below of it running while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower feature is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise handy if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are much more cost effective than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how durable the Flexispot is.
The hassle-free cable tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (since this suggested it was going to be sturdy) and also a little reluctant (because all of us understand just how much of an obstacle putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I enjoy the smooth look of this desk. I’m positive any of the many diverse surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as many times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I might on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable television grommets for travel through the outside container
for the desktop was not damaged in any way which is utterly strange because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough male if I had actually bought this I ‘d have been on the phone with customer support instantly they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually definitely where any type of cable management materials whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the double stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control panel that enables up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one advantage I would offer this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however less expensive does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my plan for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best seems like a more affordable imitation of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to have a look at their website as well which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our precious time covering various choices and accessories I might but I believe I’m happier that they just sent a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of extras is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Crank Adjustable Standing Desk H1
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity however I would invest the additional money it’s gon na require to enter a greater end producer like uplift desk or very desk and I have not personally utilized extremely desk items so I can’t speak on it but their credibility is very good big thanks to flexi spot for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a customer perspective you ‘d most likely be actually excited to get this in