today we’re taking a look at a motorized sit-stand desk…Flexispot Customer Service Email… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. If you don’t think me, take a look at the video below of it running while there’s an individual resting on it.
The electrical raise/lower function is not only easy to use and quickly, however it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise valuable if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (considering that this meant it was going to be strong) and also a little reluctant (since all of us know how much of a difficulty assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I love the smooth look of this desk. I’m confident any of the many diverse finishes that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as often times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I attempted to get as near that as I might on uplifts website with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you must know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for go through the outside container
for the desktop was not harmed in any way which is utterly unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had actually purchased this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper does not suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged also my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest seems like a cheaper imitation of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to check out their website also which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering numerous options and devices I could however I think I’m happier that they just sent out a basic desk since as a standard desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a lot of additionals is the move when the core product isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Customer Service Email
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity however I would invest the money it’s gon na take to get into a higher end manufacturer like uplift desk or very desk and I have not personally utilized very desk items so I can’t speak on it but their credibility is excellent big thanks to flexi area for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged however from a customer perspective you ‘d probably be actually delighted to get this in