today we’re taking a look at a motorized sit-stand desk…Flexispot Deal… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Inspect out the video below of it operating while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (because this suggested it was going to be durable) and also a little hesitant (due to the fact that we all understand just how much of a difficulty assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined look of this desk. I’m confident any of the many varied surfaces that it can be found in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or want to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as close to that as I might on uplifts site with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you should know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable grommets for travel through the outside container
for the desktop was not harmed in any way which is entirely unusual since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had actually purchased this I ‘d have been on the phone with customer care immediately they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any kind of cable management materials whatsoever the frame on this unit is a single motor dual phase design versus the double motor three-stage design that comes standard with the uplift desk this can be updated also to both the double phase dual motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged as well my plan for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at finest feels like a cheaper replica of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their website also which likewise feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering various choices and devices I might but I think I’m better that they only sent a standard desk since as a standard desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of extras is the move when the core item isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Deal
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and productivity however I would spend the extra money it’s gon na take to enter into a greater end producer like uplift desk or very desk and I haven’t personally used very desk products so I can’t speak on it however their reputation is great big thanks to flexi area for sending this out for evaluation regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters got here harmed but from a customer perspective you ‘d most likely be actually excited to get this in