today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Alarm… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly strong and can hold a great deal of weight. If you do not think me, take a look at the video below of it operating while there’s an individual resting on it.
The electrical raise/lower feature is not only easy to use and quick, however it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are far more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how strong the Flexispot is.
The practical cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (because this meant it was going to be strong) and likewise a little reluctant (since we all understand how much of a challenge assembling furnishings can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
Once put together, I love the streamlined look of this desk. I’m positive any of the many diverse finishes that it is available in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near that as I could on uplifts site with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get lacking even any cable grommets for travel through the outdoors container
for the desktop was not harmed in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had acquired this I ‘d have been on the phone with client service immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely absolutely where any kind of cable television management materials whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual stage dual motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but more affordable does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed too my prepare for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at best seems like a cheaper replica of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their website too which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering various alternatives and devices I might but I think I’m happier that they only sent a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of bonus is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Desk Alarm
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity however I would spend the extra money it’s gon na require to get into a higher end producer like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for evaluation sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters got here damaged however from a consumer viewpoint you ‘d probably be truly delighted to get this in