today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Asr… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s incredibly durable and can hold a great deal of weight. If you don’t believe me, take a look at the video below of it running while there’s an individual lying down on it.
The electrical raise/lower feature is not only easy to use and quickly, but it’s also remarkably smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also useful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The convenient cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this indicated it was going to be durable) and likewise a little hesitant (because we all understand just how much of an obstacle putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined appearance of this desk. I’m positive any of the many diverse surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as lot of times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as close to that as I might on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is entirely strange because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with client service instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually definitely where any kind of cable television management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come basic with the control board that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed too my prepare for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a less expensive replica of that it just does not feel quality and the distinction between this desk and my main desk is night and day do feel free to have a look at their site too which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering numerous alternatives and devices I might but I believe I’m happier that they just sent out a fundamental desk because as a basic desk I’m not a fan of the quality control at this price point and I do not believe slapping on a bunch of bonus is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Desk Asr
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance but I would invest the extra money it’s gon na require to enter a higher end maker like uplift desk or extremely desk and I have not personally used really desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters got here harmed but from a customer perspective you ‘d probably be truly excited to get this in