today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Assembly… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very positive.
It’s very easy to put together, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not just easy to use and fast, but it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much thought.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable television tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (since this implied it was going to be strong) and also a little hesitant (since all of us know how much of an obstacle putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
When put together, I enjoy the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or wish to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near that as I might on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you must know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is entirely unusual due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had purchased this I ‘d have been on the phone with customer support right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually absolutely where any sort of cable management materials whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the double stage double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my prepare for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at best seems like a less expensive replica of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to check out their website also which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering different options and devices I might but I think I’m happier that they only sent a basic desk since as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Desk Assembly
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the money it’s gon na take to get into a greater end maker like uplift desk or very desk and I haven’t personally used really desk items so I can’t speak on it but their credibility is very good huge thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters got here damaged however from a client viewpoint you ‘d probably be actually delighted to get this in