today we’re taking a look at a motorized sit-stand desk…Flexispot Desk How To Lower… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly tough and can hold a great deal of weight. Check out the video below of it operating while there’s a person lying down on it if you do not believe me.
The electrical raise/lower feature is not just easy to use and quick, but it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being practical, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also valuable if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The hassle-free cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this meant it was going to be sturdy) and also a little hesitant (since we all know just how much of a challenge putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
When put together, I love the smooth look of this desk. I’m positive any of the many varied finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as many times as you desire throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a large desktop (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as close to that as I could on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you need to know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable grommets for pass through the outside carton
for the desktop was not damaged in any way which is utterly unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had actually acquired this I ‘d have been on the phone with customer support right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly absolutely where any type of cable management products whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated also to both the double phase dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one advantage I would offer this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper does not mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged also my prepare for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at best seems like a more affordable replica of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to take a look at their website as well which also feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various alternatives and accessories I might but I think I’m better that they just sent out a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a lot of extras is the move when the core item isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years extremely desk is five years and uplift desk is 7 years if you are Flexispot Desk How To Lower
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity but I would invest the extra money it’s gon na require to enter into a higher end maker like uplift desk or extremely desk and I have not personally used very desk items so I can’t speak on it however their credibility is great huge thanks to flexi area for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged but from a client perspective you ‘d most likely be actually thrilled to get this in