today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Installation Video… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you don’t believe me, check out the video listed below of it running while there’s a person resting on it.
The electrical raise/lower function is not only easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being practical, it likewise looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise valuable if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are much more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The hassle-free cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (given that this meant it was going to be strong) and likewise a little hesitant (since we all know how much of a difficulty putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I like the smooth look of this desk. I’m positive any of the many diverse surfaces that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as many times as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I could on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you ought to know by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is entirely strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough male if I had actually bought this I ‘d have been on the phone with customer support right away they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually definitely where any type of cable television management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come standard with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged also my plan for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at finest feels like a less expensive replica of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their website too which likewise feels strangely similar to among their competitors there’s a wealth of devices you can get for the flexi area desk up to and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering various alternatives and devices I could however I think I’m happier that they only sent a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a lot of additionals is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Desk Installation Video
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the extra money it’s gon na take to enter into a greater end maker like uplift desk or really desk and I haven’t personally used extremely desk products so I can’t speak on it but their credibility is excellent big thanks to flexi area for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed however from a customer perspective you ‘d probably be really delighted to get this in