today we’re having a look at a motorized sit-stand desk…Flexispot Desk Mat… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not only easy to use and quickly, however it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also useful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are much more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how tough the Flexispot is.
The practical cable television tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (since this indicated it was going to be strong) and likewise a little hesitant (since all of us know how much of a difficulty putting together furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the sleek look of this desk. I’m confident any of the many varied finishes that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as sometimes as you desire throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or wish to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I might on uplifts site with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you should understand by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had actually purchased this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly absolutely where any type of cable management products whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated also to both the dual stage double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control panel that enables up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift but less expensive doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged also my plan for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at finest feels like a less expensive replica of that it just does not feel quality and the difference in between this desk and my main desk is night and day do feel free to take a look at their site too which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering various choices and accessories I might but I believe I’m happier that they only sent out a standard desk since as a standard desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a lot of bonus is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Desk Mat
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the extra money it’s gon na take to get into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally utilized really desk items so I can’t speak on it however their track record is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a consumer standpoint you ‘d probably be truly excited to get this in