today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Video… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. If you do not believe me, have a look at the video below of it operating while there’s an individual resting on it.
The electric raise/lower function is not just easy to use and fast, but it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much thought.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise practical if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are much more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The practical cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (considering that this implied it was going to be durable) and also a little reluctant (because all of us know just how much of a challenge putting together furniture can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once assembled, I enjoy the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as often times as you desire throughout the day.
Last but not least, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near to that as I could on uplifts website with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you must know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough guy if I had bought this I ‘d have been on the phone with customer service instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely definitely where any kind of cable management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one benefit I would give this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive does not mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed too my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best feels like a less expensive imitation of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their site too which also feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering numerous alternatives and devices I could but I think I’m better that they just sent a basic desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a lot of bonus is the relocation when the core item isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Desk Video
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity however I would spend the additional money it’s gon na require to get into a greater end producer like uplift desk or extremely desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their reputation is very good big thanks to flexi spot for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a consumer perspective you ‘d most likely be actually thrilled to get this in