today we’re having a look at a motorized sit-stand desk…Flexispot Discount… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s very tough and can hold a lot of weight. Inspect out the video listed below of it operating while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower feature is not just easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much idea.
On top of being functional, it also looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how durable the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (given that this indicated it was going to be durable) and also a little hesitant (due to the fact that we all understand how much of a difficulty assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the smooth look of this desk. I’m positive any of the many diverse finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as sometimes as you desire throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as close to that as I could on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you ought to understand by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable television grommets for go through the outdoors carton
for the desktop was not damaged in any way which is utterly strange because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had purchased this I ‘d have been on the phone with client service instantly they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually absolutely where any type of cable management materials whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual stage double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control board that enables up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed too my plan for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best feels like a more affordable imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do feel free to check out their site also which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering various options and accessories I might however I believe I’m better that they just sent out a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a bunch of additionals is the move when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Discount
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency however I would spend the extra money it’s gon na require to enter into a greater end maker like uplift desk or really desk and I haven’t personally utilized extremely desk products so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters got here damaged however from a client perspective you ‘d probably be truly delighted to get this in