today we’re having a look at a motorized sit-stand desk…Flexispot E1 Test… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really simple to assemble, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. If you do not believe me, have a look at the video listed below of it running while there’s a person lying down on it.
The electrical raise/lower function is not only easy to use and quick, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how sturdy the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (considering that this implied it was going to be durable) and likewise a little reluctant (since we all know just how much of a challenge assembling furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the smooth appearance of this desk. I’m confident any of the many diverse surfaces that it can be found in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to switch between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or wish to take a nap on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near to that as I might on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you need to understand by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable grommets for travel through the outdoors container
for the desktop was not harmed in any way which is absolutely bizarre because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had actually acquired this I ‘d have been on the phone with customer support right away they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely absolutely where any sort of cable management materials whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed too my prepare for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furnishings that will last you this at finest feels like a less expensive imitation of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their site too which likewise feels eerily comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering different choices and accessories I might however I think I’m happier that they only sent a basic desk because as a standard desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of extras is the relocation when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot E1 Test
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and performance however I would invest the additional money it’s gon na require to enter a greater end maker like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d probably be actually delighted to get this in