today we’re taking a look at a motorized sit-stand desk…Flexispot E1B-r5528B Electric Height Adjustable Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower function is not just easy to use and quickly, but it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much idea.
On top of being practical, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how durable the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (since this indicated it was going to be tough) and likewise a little reluctant (since all of us know just how much of an obstacle assembling furniture can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the sleek look of this desk. I’m positive any of the many diverse surfaces that it can be found in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as near that as I might on uplifts site with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you should know by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had bought this I ‘d have been on the phone with customer service instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely definitely where any type of cable television management products whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper does not indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged as well my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a less expensive replica of that it just doesn’t feel quality and the distinction between this desk and my main desk is night and day do feel free to check out their site also which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering numerous alternatives and accessories I might however I think I’m happier that they only sent out a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a bunch of extras is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot E1B-r5528B Electric Height Adjustable Desk
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and performance but I would spend the additional money it’s gon na take to enter into a higher end maker like uplift desk or very desk and I haven’t personally used really desk items so I can’t speak on it but their reputation is great big thanks to flexi area for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a customer viewpoint you ‘d most likely be actually delighted to get this in