today we’re having a look at a motorized sit-stand desk…Flexispot E2 Frame… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. If you do not believe me, have a look at the video below of it operating while there’s a person lying down on it.
The electric raise/lower function is not just easy to use and quick, but it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much thought.
On top of being practical, it likewise looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are even more economical than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how sturdy the Flexispot is.
The practical cable television tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this indicated it was going to be sturdy) and also a little hesitant (since we all know how much of a challenge assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I like the sleek appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as near to that as I might on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you need to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is entirely strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had acquired this I ‘d have been on the phone with client service right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely absolutely where any kind of cable management materials whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come basic with the control board that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one advantage I would give this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed too my plan for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at best seems like a less expensive imitation of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to take a look at their site also which likewise feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering numerous options and accessories I might however I believe I’m happier that they only sent a fundamental desk since as a standard desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a lot of additionals is the relocation when the core product isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot E2 Frame
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and performance but I would invest the extra money it’s gon na take to enter into a greater end manufacturer like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it however their credibility is very good huge thanks to flexi spot for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged however from a customer standpoint you ‘d most likely be actually thrilled to get this in