today we’re taking a look at a motorized sit-stand desk…Flexispot E6 Vs E5… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower feature is not just easy to use and fast, but it’s also remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much thought.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise practical if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how durable the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (because this suggested it was going to be sturdy) and likewise a little reluctant (because we all understand just how much of a difficulty assembling furnishings can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the smooth look of this desk. I’m confident any of the many diverse finishes that it is available in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as many times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or want to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as near to that as I might on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you should know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable grommets for go through the outdoors container
for the desktop was not damaged in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough man if I had actually acquired this I ‘d have been on the phone with client service right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly absolutely where any sort of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however less expensive doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed also my plan for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furnishings that will last you this at finest seems like a less expensive replica of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to take a look at their website as well which also feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our precious time covering various choices and accessories I might but I believe I’m better that they only sent out a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a lot of bonus is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot E6 Vs E5
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance but I would spend the extra money it’s gon na require to enter into a greater end maker like uplift desk or extremely desk and I haven’t personally used extremely desk products so I can’t speak on it but their reputation is great huge thanks to flexi spot for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters got here damaged but from a client viewpoint you ‘d probably be really thrilled to get this in