today we’re having a look at a motorized sit-stand desk…Flexispot E6 Vs E7 Vs E8… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s very simple to put together, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s very tough and can hold a lot of weight. If you don’t believe me, take a look at the video listed below of it running while there’s an individual resting on it.
The electric raise/lower function is not just easy to use and fast, but it’s likewise surprisingly smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being functional, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how durable the Flexispot is.
The hassle-free cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (since this indicated it was going to be strong) and also a little hesitant (because all of us understand just how much of a challenge putting together furniture can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I love the sleek look of this desk. I’m positive any of the many diverse surfaces that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or wish to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as close to that as I could on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is absolutely unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough male if I had purchased this I ‘d have been on the phone with customer service instantly they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function strangely definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the dual stage double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but less expensive does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged as well my plan for this desk at this moment is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best seems like a less expensive replica of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their website too which likewise feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering different alternatives and devices I could however I believe I’m happier that they just sent out a basic desk since as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a lot of additionals is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot E6 Vs E7 Vs E8
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and productivity however I would invest the extra money it’s gon na require to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters got here damaged but from a consumer viewpoint you ‘d probably be truly delighted to get this in