today we’re having a look at a motorized sit-stand desk…Flexispot E6… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to put together, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. Examine out the video below of it operating while there’s an individual lying down on it if you do not think me.
The electric raise/lower function is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much idea.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are even more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how tough the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (considering that this meant it was going to be strong) and also a little reluctant (because we all know just how much of a challenge putting together furniture can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as put together, I enjoy the smooth appearance of this desk. I’m positive any of the many diverse finishes that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near that as I might on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you must understand by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is absolutely bizarre because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough man if I had actually bought this I ‘d have been on the phone with customer service immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually definitely where any kind of cable television management materials whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one benefit I would give this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged too my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest seems like a cheaper replica of that it simply does not feel quality and the distinction in between this desk and my primary desk is night and day do feel free to take a look at their site too which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering various options and devices I might however I believe I’m happier that they only sent a standard desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a lot of additionals is the move when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot E6
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency however I would spend the money it’s gon na take to get into a higher end producer like uplift desk or really desk and I haven’t personally used very desk items so I can’t speak on it however their reputation is excellent huge thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged however from a client standpoint you ‘d most likely be really delighted to get this in