today we’re taking a look at a motorized sit-stand desk…Flexispot E7 Frame… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very positive.
It’s really easy to put together, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. Examine out the video below of it operating while there’s an individual lying down on it if you don’t think me.
The electrical raise/lower function is not just easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being practical, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are even more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this suggested it was going to be tough) and also a little hesitant (because we all know just how much of an obstacle putting together furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I love the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as lot of times as you want throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I might on uplifts site with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you need to know by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for go through the outside container
for the desktop was not harmed in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had bought this I ‘d have been on the phone with customer service immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly absolutely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift but less expensive does not imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed as well my prepare for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at finest seems like a cheaper imitation of that it just doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to take a look at their site also which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering different alternatives and accessories I might however I think I’m better that they just sent out a basic desk because as a basic desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a lot of extras is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot E7 Frame
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity but I would spend the additional money it’s gon na take to enter into a greater end producer like uplift desk or extremely desk and I have not personally utilized very desk products so I can’t speak on it but their reputation is very good big thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d most likely be truly thrilled to get this in