today we’re taking a look at a motorized sit-stand desk…Flexispot E8 Erfahrung… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s very strong and can hold a lot of weight. If you don’t think me, take a look at the video below of it running while there’s an individual resting on it.
The electrical raise/lower feature is not just easy to use and fast, however it’s likewise surprisingly smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are much more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t necessarily a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how durable the Flexispot is.
The convenient cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (given that this suggested it was going to be tough) and likewise a little hesitant (because we all understand how much of a difficulty assembling furnishings can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined look of this desk. I’m positive any of the many diverse finishes that it is available in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as many times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as near that as I could on uplifts site with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you should understand by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get lacking even any cable grommets for pass through the outside container
for the desktop was not harmed in any way which is utterly unusual since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had actually acquired this I ‘d have been on the phone with customer service instantly they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control board that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% more affordable even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed also my plan for this desk at this point is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furniture that will last you this at best seems like a less expensive imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their site as well which also feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering various options and accessories I could but I believe I’m better that they only sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot E8 Erfahrung
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the additional money it’s gon na require to get into a greater end manufacturer like uplift desk or very desk and I haven’t personally used very desk products so I can’t speak on it but their track record is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged however from a customer viewpoint you ‘d probably be really thrilled to get this in