today we’re having a look at a motorized sit-stand desk…Flexispot Ec1 レビュー… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very durable and can hold a lot of weight. If you do not believe me, take a look at the video below of it running while there’s a person resting on it.
The electric raise/lower feature is not only easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also helpful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The convenient cable television tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (because this suggested it was going to be tough) and also a little reluctant (due to the fact that all of us know just how much of a difficulty putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the smooth look of this desk. I’m confident any of the many varied finishes that it is available in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as sometimes as you want throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near that as I might on uplifts site with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review however as you ought to know by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for go through the outdoors container
for the desktop was not damaged in any way which is absolutely unusual since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had bought this I ‘d have been on the phone with customer service immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually absolutely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged too my plan for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a more affordable replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their site as well which also feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our valuable time covering numerous options and devices I might but I believe I’m better that they just sent a standard desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of bonus is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Ec1 レビュー
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance but I would invest the extra money it’s gon na require to enter into a higher end maker like uplift desk or extremely desk and I haven’t personally used extremely desk products so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed however from a consumer viewpoint you ‘d most likely be actually delighted to get this in