today we’re taking a look at a motorized sit-stand desk…Flexispot Ec1 Installation… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. If you do not believe me, check out the video below of it running while there’s an individual lying down on it.
The electrical raise/lower function is not only easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are much more budget friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The hassle-free cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this suggested it was going to be sturdy) and also a little hesitant (since we all understand just how much of a difficulty assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I like the streamlined appearance of this desk. I’m positive any of the many varied surfaces that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as many times as you desire throughout the day.
Lastly, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or want to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I could on uplifts site with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you must know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is entirely strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had actually acquired this I ‘d have been on the phone with customer service right away they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely definitely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual stage double motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but less expensive doesn’t suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed also my plan for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a less expensive replica of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to have a look at their site also which likewise feels eerily similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering different choices and accessories I might however I believe I’m happier that they just sent out a basic desk since as a basic desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a bunch of additionals is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Ec1 Installation
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and efficiency but I would spend the money it’s gon na require to enter into a greater end maker like uplift desk or extremely desk and I have not personally used very desk products so I can’t speak on it however their reputation is excellent big thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged however from a consumer viewpoint you ‘d most likely be really thrilled to get this in